Highlights & Details:
- +60km/h · 4WD
- Water-resistant brushless speed controller
- 3421KV brushless motor
- Pre-printed race body
Features:
- Ready assembled
- Water-resistant 50A brushless speed controller
- 2.4 GHz radio system "CR2S"
- 4 kg steering servo
- 4WD
- Complete ball bearing
- Aluminum adjustable oil shocks
- 2 gear differentials
- 3421KV brushless motor
- Aluminum chassis stiffener
- Steel shafts - front/rear
- Full adjustable chassis
- Aluminum motor mount
- Aluminum drive shaft
- Pre-printed body
- Steel transmission (spur gear and pinion gear)
Technical specifications:
- Measure: ( L/W/H) 450x190x140 mm
- Weight: 1425g
- Radstand 260 mm
- Chassis clearance: 20 mm
- Front track 170 mm / Rear track 170 mm
- Tires: Ø ± 65 mm / Width 27mm front/rear
- Chassis: ATC
- Viskosity Shock Oil: 300CPS f/r
- Shock Size: front 62mm / rear 62mm
- Internal transmission: 13T / 38T
- Motor transmission: Spur gear 64T / Pinion gear 29T (Module 0.6)
Technical specification speed controller Thrust:
- Water resistant 50A controller incl. cooler
- 3S LiPo suitable
- T-plug battery connector
- Gold-bonded motor connector 3.5mm
- Easy calibration and programming
- Sensorless
- NiMH 4 - 9 cells / LiPo 2 - 3 cells
- Overheat protection: 95°
- Peak amps: 300A
- BEC 6V / 3A
- Operating voltage 4.8 – 11.1V
- Motor timing 18.75 deg.
- Motor limit @2S LiPo / 6 cells NiMH = Onroad < 8T / Offroad < 11T
- Motor limit @3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T
Programmable functions:
- Brake power 25% - 100%
- Neutral brake 0% - 40%
- Drive mode: forward-brake-backwards / forward-brake
- Start mode (Punch): Level 1-4 (soft - aggressiv)
- Low voltage cutt-off: off - 3.4V (default setting: 3.0V)
- Technichal data : Measure (L/W/H) : 48.5 x 38 x 32 mm
- Weight: 90g
Technichal data motor Thrust:
- 3421 KV
- 27.400 RPM/min @ 7.4 Volt
- 4 Pole
- Operating voltage: 4.8 – 11.1V
- Motor size: 540
- Motor length: 52.0 mm
- Motor Ø : 36.0 mm
- Shaft length: 14.5 mm
- Shaft Ø: 3,17 mm
Technical data servo S40PH:
- Size: Standard (Car)
- Operating force: 4,0kg @ 4,8V
- Speed: 0,16 Sec / 60° @ 4,8V
- Gears: Nylon
- Outdrive: 25T
- Plug system: JR
- Measure: (LxWxH) 40,2 mm x 20,4 mm x 39,8 mm
- Voltage: 4.8V - 6.6V
- Weight: 43g
- Ball bearing
Technical data radio system:
- 2-channel radio
- 3-channel mini receiver
- Reverse function
- Dual rate and trimming adjustable
- Battery case for 4 Mignon AA cells (not included)
Scope of delivery: 1 pcs. ATC2.4 Touring Car brushless RTR ( Incl. Motor, Speed controller, Steering servo - ready assembled) · Radio system · Manual
Required accessories: NiMH Racing pack or LiPo battery · Charger · 4 Mignon AA cells (radio)
Maximize 
