Maximize Gmade GS02 Komodo Crawler 1/ 10 Double Cab TS
You can purchase this product in installments with Consel. Click here for more information.
RTR VERSION WITH COMPLETE ELECTRONICS (BATTERY AND CHARGER NOT INCLUDED)
Steel structure
The GS02 frame is designed to look like a real car chassis and the material of the frame is made of high-strength steel, lateral C-channel guide and is equipped with a hexagonal key bolted with cross elements, which make it resistant twisting or winding. In addition, the steel parts are black powder coated to prevent rust.
Adjustable wheelbase
The GS02 chassis allows three types of easy adjustment of the wheelbase conversion kit to use any type of custom bodywork of 300, 313 and 324 mm. (optional connection kits are sold separately)
Front weight balance
The weight balance of the Komodo double cab is designed to be positioned on the front of the car. This will increase the traceability of the tire towards the front wheel to offer better scanning on rocks with a high angle of inclination and better driving performance uphill and this will help to minimize the vehicle's overturning during the climb.
Chassis mounted servo system with Panhard bar
The steering system of the Komodo double cabin has power steering on the chassis just like a real 1: 1 car. It is designed to make it closed to zero zero steering so that the steering movement does not appear from the movements of the front wheel suspension so we ended up maximizing the vehicle's steering performance. In addition, the Panhard bar is designed to avoid interference with neighboring parts, so that the front suspension and shock absorbers can move freely without any loss.
Battery housing
The battery can be easily replaced and can hold up to 7,600 mAh of 2-cell Lipo batteries or 5,000 mAh of 3-cell Lipo batteries. (7,600 mAh with 2 LiPo cells or 5,000 mAh with 3 LiPo cells).
Electronic dust-proof box
It protects electronic equipment such as winch controllers and BEC from foreign substances, which are often used for scale trucks.
Skid plate
The skid plate protects the transmission and other critical components from the flat surface which allows the Komodo double cab to slide and ride easily on rocks and other obstacles.
Guidelines
The transmission lines of the front and rear axles are arranged in a straight line to reduce the fatigue stress of the universal shaft and reduce the loss of drive power by providing efficient guide lines.
Easy to adjust engine mount
You can easily replace and install the engine pinion to change the gear ratio.
Axle GA44
The GA44 axis is designed with hardcore crawler track in mind. The axles are made of high strength meters and will look and offer optimal off-road performance like a real 1: 1 vehicle when 4-Link suspension is added.
The housing of the GA44 axis is of the resistant one-piece type. The angle of the differential cover is designed to reduce the risk of damage due to frontal impact and is therefore very suitable for off-road driving.
Pin angle
Keep the wash radius to a minimum to allow the power steering to operate at its full potential and increase steering efficiency.
Zero Ackerman Steering
The GA44 axle uses the Zero-ackerman with CVA steering system to ensure maximum performance with a short turning radius and smooth movement even on rough off-road terrain.
SD Scaler shock
SD Scaler Shock is a Coil-over style oil-filled shock absorber optimized for scale trucks. Oil filled inside the shock absorber minimizes splashing while driving the vehicle and provides a high strength aluminum shock body with 3.5mm heavy duty shock absorber shafts, which will help you drive roughly on rough surfaces . Beginners can also easily mount this shock and change settings, and the adjustable nut simplifies the ride height adjustment so you can quickly change the configuration of your car even when driving conditions change.
MT-1903 1.9 "M / T off-road tire
The MT 1903 off-road tire in super soft compound material offers high surface traction. The steps of the tire model are suitable for off-road driving and are designed with a large diameter that allows you to run smoothly on any uneven road surface.
Lexan bodywork with double Komodo cab
The body of the Komodo double cab is made of high-quality 1.5 mm thick lexan and designed in the platform of the pickup truck with a robust and elegant body. It includes a grill, a light bucket, a side mirror, a wiper grill
No customer comments for the moment.
