Tamiya Mercedes-Benz Arocs 8x4 Dump Truck Kit 1 /14

This kit allows the faithful reproduction of the Mercedes-Benz Arocs dumper in the 8 × 4 radio-controlled configuration in 1/14 scale with great attention to detail.
It features a highly realistic truck floor section and the tub can be operated from the radio transmitter, using the actuator set, sold separately (item 56545)!
The frame consists of two metal side members with resin cross members and is equipped with a highly realistic suspension that uses metal leaf springs and friction dampers.
A front engine and three-speed gearbox transmission power the two rear wheel axles, which are equipped with integrated differentials to allow for smooth cornering.
A 4-channel R / C system and a multifunction unit, sold separately, allow you to drive the vehicle and control realistic lights, sounds and vibrations.
• 1/14 scale R / C model assembly kit. Length: 667mm, Width: 196mm, Height: 268mm.
• The line of the Arocs 4151 is recreated with injection molded bodywork, including details of the cabin rails, the intake duct and other details. Separate parts recreate side mirrors and visor, etc.
• Both front axles are steered by a single servo. The wheels spin realistically at slightly different angles.
• Features an all-new truck bed section consisting of a metal subframe for exceptional durability.
• Install the separately sold actuator set (item 56545) for realistic truck bed movement.
• The powerful TR engine (35T) provides the two rear axles with ample power to carry loads into the truck tank.
• The new battery compartment is located above the second axis, which allows access even when there are loads in the bed.
• The roof features light bars, which can be fitted with LEDs for a realistic finish.
• The 3-speed transmission can be controlled via a 4-channel R / C transmitter, sold separately.
• Metal leaf springs with integrated coil springs ensure a durable suspension.
• Ability to install MFC-03 (Item 56523), sold separately (or MFC-01, Item 56511) for realistic lights and sounds.
• For completion, the following are required, sold separately: 4-channel remote control, 2 servos (steering + gearbox), electronic regulator (not necessary if MFC-03 multifunctional is installed), 7.2V battery and relative battery charger.

REQUIRED FOR THIS KIT:
4ch Radio(min.) + 2 Servos	6 Cells Battery	Radio Batteries	Charger	Glue	Tools